Hand Scraped Flooring: Points to Keep in Mind

The demand for hand-scraped flooring is growing. Yet, this type of flooring, in terms of appearance, isn't like any other. If you are one of the many considering it for your home, what points do you need to keep in mind as you look for the right type of hand-scraped hardwood?

First, nearly all species – domestic and exotic – are available as this distressed variety. Species from white oak to Brazilian cherry are all available with this distressed and rustic look. And, any floor of a building can have hand-scraped flooring, as both solid and engineered types are distressed. As you look at different types of hand-scraped flooring, think about where you will be installing it into your home, and plan accordingly with the right type of solid or engineered hardwood.

What's most notable about hand-scraped hardwood is its creation. All planks are distressed by hand, and as a result, no two appear similar. Multiple methods are used for distressing hardwood, including the following techniques for aging, scraping, or finishing.

Aged hardwood goes by one of two names: Time Worn Aged or Antique. Both are similar, but a lower grade is used for Antique flooring. In addition to being aged, the hardwood's distressed appearance is accented further through darker staining, highlighting the grain, or contouring.

Scraping techniques alter the texture of the hardwood, making an otherwise smooth surface rough. Wire Brushed is a term used to indicate hand-scraped flooring with removed sapwood and accented grain. Hand-sculpted, on the other hand, still has texture but is smoother than other varieties. Hardwood that is Hand Hewn and Rough Sawn has the roughest texture for hand-scraped flooring, with even saw marks visible.

Flooring that uses finish to give hardwood an aged texture is usually sold as French Bleed. Such hand-scraped flooring has deeper beveled edges, and the joints of the floor are highlighted with darker stain. Also a somewhat superficial type of hand-scraped flooring is pegged. Considered to be decorative only, pegged flooring must not be fastened directly onto a subfloor.

If you want an even less uniform appearance for your floor, consider having it custom distressed. In this case, after the unfinished hardwood is installed, a professional comes in to alter it through beating with chains, pickeling, fastening with antique nails, or bleaching. After, a finish is applied.

Also as you look at hand-scraped hardwood, think about your flooring long term. Will you want a distressed appearance a decade or more down the line? If not, plan ahead by going with flooring that can be sanded down: solid hardwood or an engineered variety with a thicker wear layer.

If, on the other hand, you plan to keep the hand-scraped flooring, think about how you will refinish it years down the line. Ideally, to keep up the distressed look without diminishing it through sanding, you will need a floor abrader to remove only the finish, or be prepared to have a professional refinish your floors.

Source:http://www.articlesbase.com/home-improvement-articles/hand-scraped-flooring-points-to-keep-in-mind-5435851.html

Web Data Scraping Services Have Various Method Of Business

Magnetic or optical data removal or Data Scraping Services is a term that refers to the elimination of digital storage media. Data Scraping Services of the method varies, depending on medium and method used in the process.

Similarly, patents, models, business strategies and other confidential business information, including sensitive data, can be easily accessed by others if the data is not deleted.As I said in the beginning, Data Scraping Services methods vary depending on the storage medium. For each storage medium, there are a variety of Data Scraping Services techniques.

Optical media such as  that can be destroyed by the plastic granulating. This method does not extract information, but makes recovery almost impossible. However, removal of thin film that coats the top of the disk, scraping, sanding by hand or destroy physical data. In contrast, using the microwave, a less traditional technologies, stable and disk storage layer of the thin film is very effective for the most common cause sparks to load.

Typical modern magnetic media and hard drives, tape backup units of such media is possible, but in the face of such devices requires considerable financial investment in the plant. Acids, in particular, nitric acid, 50% concentration in the iron oxide layer to react with violence, it will be completely destroyed within a few minute. In some cases it may be a storage alternative for incineration. However, this may inadvertently expose caseinogens operator and may be restricted in certain countries.

Data Scraping Services, on the other hand, is defined by Wikipedia as "an automatic search for large stores of data for patterns of practice." In other words, you already know, and you learn things about it useful analysis.

Data Scraping Services is often accompanied by a lot of complex algorithms based on statistical methods. How do you see the data in the first place - is not. Data Scraping Services analysis, you only care about what is already there in many cases, a single-pass binary wipe (to write random zeroes and ones riding) will permanently deletes all data from the storage device to remove.

use of materials recovery.
It is for this reason that the technology has been left until last.
Data Scraping Services, screen scraping is not.
This is a great simplification, so I will work a bit.

Fast-forwarding to the web world today, screen scraping is the information relates to websites. This means that computer programs "crawl" or can "spider" through web sites, data retrieval. people, We deserved pages, text data Scraping Services, automated data collection, data extraction and web site even bloody website if we have a problem it presents some.

Data Scraping Services, on the other hand, is defined by Wikipedia as "an automatic search for large stores of data for patterns of practice." In other words, you already know, and you learn things about it useful analysis. Data Scraping Services is often accompanied by a lot of complex algorithms based on statistical methods. How do you see the data in the first place - is not. Data Scraping Services analysis, you only care about what is already there.

Source:http://www.articlesbase.com/outsourcing-articles/web-data-scraping-services-have-various-method-of-business-5594515.html

Scraping By

In his classic 1976 Chesapeake portrait, Beautiful Swimmers, William Warner described the scrape boat as "a workboat unlike any other I had ever seen on the Bay." Seeming half as wide as it was long, he said, it looked like a "a miniature battleship." There's a reason for that, of course. It's a classic case of form following function; the boat evolved for one purpose, to ply the Bay's grassy shallows for shedding blue crabs.

Said to "float on a heavy dew," scrape boats run from 26 to 30 feet long and 9 to 10 feet wide. The hull is a shallow-V deadrise that quickly flattens toward the stern, enabling the boat to pull its twin scrapes—rectangular steel frames, each with a trailing mesh bag—in knee-deep waters. The broad beam might sound ungainly, but the hull tapers toward the stern—betraying its sailboat origins. And it has a graceful sheer, flowing from a bow height of a few feet to little more than a foot above the water amidships.

And you want a low freeboard when you spend the whole day hoisting aboard scrapes, which weigh 50 pounds apiece, not including the load of sea grass and crabs that come in too. Low sides or not, there's a higher than average inci-dence of back problems among scrape boat crabbers. They spend long days bending in precisely the position back doctors say puts undue pressure on the lower back as they sort through rolls of grasses to pluck out the peelers and softies. And that alone may be why crab potting is now the far more common way of catching soft crabs.

Some people think that's good, assuming that dragging a scrape across the Bay's beleaguered grass flats must be destructive. But the smooth bar of the scrape, unlike a toothed dredge, doesn't uproot grasses. In fact, where scraping is traditional, the grass beds seem relatively resilient. I've often thought if Maryland and Virginia had stuck with scraping as the major legal way to soft-crab, overfishing might not have become a problem. Pots can be deployed everywhere and by the thousands, whereas scraping is limited to grass beds and to ground covered at three miles per hour; and even the sturdiest waterman can only pull two of them by hand. But peeler pots seem here to stay, and other soft crabbers have taken to using a single, large scrape operated from larger workboats by hydraulic power.

The bottom line is that these lovely, superbly functional expressions of Chesapeake crabbing culture now number only in the dozens, if you count working, wooden models. There are some fiberglass scrape boat hulls in service, and a Carolina skiff or two has been adapted for the task. They are functional, but have little art to them.

It is probably a sign of how fast scrape boats are going that the Smithsonian Institution recently took the lines off Darlene, a scraper worked by Morris Marsh of Smith Island, for its archives. You can see photos of scrape boats, and learn more about the 140-year old history of scraping, from Paula Johnson's fine book, The Workboats of Smith Island. Mr. Marsh, still going strong in his late 60s, is the scraper who took Warner out nearly 40 years ago when he was researching Beautiful Swimmers.

Indeed, scraping seems to win over those who master it. Marsh's father-in-law, Ed Harrison, scraped for almost 70 years, nearly wearing through the cross-planked bottom of his boat—from the inside—with decades of walking the planks, tending his scrapes. And an islander who scrapes with Marsh today, David Laird, says he is 71—one year younger than Scotty Boy, the scrape boat he took over from his dad in 1958. "I wouldn't even know how to crab in another boat," Laird says.

Soft crabs may well be caught—or farmed—a century from now on the Chesapeake; but no one will devise a way to take them so intimately and beautifully from the shallowest marsh edges and tiniest crevices in the shore as the scrapers do.

Source:http://www.articlesbase.com/culture-articles/scraping-by-1560919.html

Scrape Web data using R

Plenty of people have been scraping data from the web using R for a while now, but I just completed my first project and I wanted to share the code with you.  It was a little hard to work through some of the “issues”, but I had some great help from @DataJunkie on twitter.

As an aside, if you are learning R and coming from another package like SPSS or SAS, I highly advise that you follow the hashtag #rstats on Twitter to be amazed by the kinds of data analysis that are going on right now.

One note.  When I read in my table, it contained a wierd set of characters.  I suspect that it is some sort of encoding, but luckily, I was able to get around it by recoding the data from a character factor to a number by using the stringr package and some basic regex expressions.

Bring on fantasy football!

################################################################

## Help from the followingn sources:

## @DataJunkie on twitter

## http://www.regular-expressions.info/reference.html

## http://stackoverflow.com/questions/1395528/scraping-html-tables-into-r-data-frames-using-the-xml-package

## http://stackoverflow.com/questions/1395528/scraping-html-tables-into-r-data-frames-using-the-xml-package

## http://stackoverflow.com/questions/2443127/how-can-i-use-r-rcurl-xml-packages-to-scrape-this-webpage

################################################################

library(XML)

library(stringr)

# build the URL

url <- paste("http://sports.yahoo.com/nfl/stats/byposition?pos=QB",

        "&conference=NFL&year=season_2009",
        "&timeframe=Week1", sep="")

# read the tables and select the one that has the most rows

tables <- readHTMLTable(url)

n.rows <- unlist(lapply(tables, function(t) dim(t)[1]))

tables[[which.max(n.rows)]]

# select the table we need - read as a dataframe

my.table <- tables[[7]]

# delete extra columns and keep data rows

View(head(my.table, n=20))

my.table <- my.table[3:nrow(my.table), c(1:3, 5:12, 14:18, 20:21, 23:24) ]

# rename every column

c.names <- c("Name", "Team", "G", "QBRat", "P_Comp", "P_Att", "P_Yds", "P_YpA", "P_Lng", "P_Int", "P_TD", "R_Att",

        "R_Yds", "R_YpA", "R_Lng", "R_TD", "S_Sack", "S_SackYa", "F_Fum", "F_FumL")

names(my.table) <- c.names

# data get read in with wierd symbols - need to remove - initially stored as character factors

# for the loops, I am manually telling the code which regex to use - assumes constant behavior

# depending on where the wierd characters are -- is this an encoding?

front <- c(1)

back <- c(4:ncol(my.table))

for(f in front) {

    test.front <- as.character(my.table[, f])

    tt.front <- str_sub(test.front, start=3)

    my.table[,f] <- tt.front

}

for(b in back) {

    test <- as.character(my.table[ ,b])

    tt.back <- as.numeric(str_match(test, "\-*\d{1,3}[\.]*[0-9]*"))

    my.table[, b] <- tt.back
}

str(my.table)

View(my.table)

# clear memory and quit R

rm(list=ls())

q()

n

Source: http://www.r-bloggers.com/scrape-web-data-using-r/

Basic Information About Tooth Extraction Cost

In order to maintain the good health of teeth, one must be devoted and must take proper care of one's teeth. Dentists play a huge role in this regard and their support is important in making people aware of their oral conditions, so that they receive the necessary health services concerning the problems of the mouth.

The flat fee of teeth-extraction varies from place to place. Nonetheless, there are still some average figures that people can refer to. Simple extraction of teeth might cause around 75 pounds, but if people need to remove the wisdom teeth, the extraction cost would be higher owing to the complexity of extraction involved.

There are many ways people can adopt in order to reduce the cost of extraction of tooth. For instance, they can purchase the insurance plans covering medical issues beforehand. When conditions arise that might require extraction, these insurance claims can take care of the costs involved.

Some of the dental clinics in the country are under the network of Medicare system. Therefore, it is possible for patients to make claims for these plans to reduce the amount of money expended in this field. People are not allowed to make insurance claims while they undergo cosmetic dental care like diamond implants, but extraction of teeth is always regarded as a necessity for patients; so most of the claims that are made in this front are settled easily.

It is still possible for them to pay less at the moment of the treatment, even if they have not opted for dental insurance policies. Some of the clinics offer plans which would allow patients to pay the tooth extraction cost in the form of installments. This is one of the better ways that people can consider if they are unable to pay the entire cost of tooth extraction immediately.

In fact, the cost of extracting one tooth is not very high and it is affordable to most people. Of course, if there are many other oral problems that you encounter, the extraction cost would be higher. Dentists would also consider the other problems you have and charge you additional fees accordingly. Not brushing the teeth regularly might aid in the development of plaque and this can make the cost of tooth extraction higher.

Maintaining a good oral health is important and it reflects the overall health of an individual.

To conclude, you need to know the information about cost of extraction so you can get the right service and must also follow certain easy practices to reduce the tooth extraction cost.

Source:http://ezinearticles.com/?Basic-Information-About-Tooth-Extraction-Cost&id=6623204

Data Mining - Techniques and Process of Data Mining

Data mining as the name suggest is extracting informative data from a huge source of information. It is like segregating a drop from the ocean. Here a drop is the most important information essential for your business, and the ocean is the huge database built up by you.

Recognized in Business

Businesses have become too creative, by coming up with new patterns and trends and of behavior through data mining techniques or automated statistical analysis. Once the desired information is found from the huge database it could be used for various applications. If you want to get involved into other functions of your business you should take help of professional data mining services available in the industry

Data Collection

Data collection is the first step required towards a constructive data-mining program. Almost all businesses require collecting data. It is the process of finding important data essential for your business, filtering and preparing it for a data mining outsourcing process. For those who are already have experience to track customer data in a database management system, have probably achieved their destination.

Algorithm selection

You may select one or more data mining algorithms to resolve your problem. You already have database. You may experiment using several techniques. Your selection of algorithm depends upon the problem that you are want to resolve, the data collected, as well as the tools you possess.

Regression Technique

The most well-know and the oldest statistical technique utilized for data mining is regression. Using a numerical dataset, it then further develops a mathematical formula applicable to the data. Here taking your new data use it into existing mathematical formula developed by you and you will get a prediction of future behavior. Now knowing the use is not enough. You will have to learn about its limitations associated with it. This technique works best with continuous quantitative data as age, speed or weight. While working on categorical data as gender, name or color, where order is not significant it better to use another suitable technique.

Classification Technique

There is another technique, called classification analysis technique which is suitable for both, categorical data as well as a mix of categorical and numeric data. Compared to regression technique, classification technique can process a broader range of data, and therefore is popular. Here one can easily interpret output. Here you will get a decision tree requiring a series of binary decisions.

Our best wishes are with you for your endeavors.

Source: http://ezinearticles.com/?Data-Mining---Techniques-and-Process-of-Data-Mining&id=5302867

Do blog scraping sites violate the blog owner's copyright?

I noticed that my blog has been posted on one of these website scraping sites. This is the kind of site that has no original content, but just repeats or scrapes content others have written and does it to get some small amount of ad income from ads on the scraping site. In essence the scraping site is taking advantage of the content of the originating site in order to make a few dollars from people who go to the site looking for something else. Some of these websites prey on misspelling. If you accidentally misspell the name of an original site, you just may end up with one of these patently commercial scraping sites.

Google defines scraping as follows:

•    Sites that copy and republish content from other sites without adding any original content or value
•    Sites that copy content from other sites, modify it slightly (for example, by substituting synonyms or using automated techniques), and republish it
•    Sites that reproduce content feeds from other sites without providing some type of unique organization or benefit to the user

My question, as set out in the title to this post, is whether or not scraping is a violation of copyright. It turns out that the answer is likely very complicated.  You have to look at the definition of a scraping site very carefully. Let me give you some hypotheticals to show what I mean.

Let's suppose that I write a blog and put a link in my blog post to your blog. Does that link violate your copyright? I can't imagine that anyone would think that there was problem with linking to another website on the Web. In this case, there is no content from the originating site, just a link.

But let's carry the hypothetical a little further. What if I put a link to your site and quote some of your content? Does this violate copyright law? If you are acquainted with any of the terminology of copyright law; think fair use. The issue here is whether or not the "quoted" material is a substantial reproduction of the entire original content? I would have the opinion that duplicating an entire blog post either with or without attribution would be a violation of the originator's copyright.

So is the scraping website protected by the "fair use" doctrine? Does the fact that the motivation for listing the original websites is to make money have anything to do with how you would decide if there was or was not a violation of the originator's copyright? By the way, the copyright does not make a distinction between a commercial and non-commercial use of the original constituting or not constituting a violation of copyright. The fact that the reproducing (scraping) party does not make money from the reproduction is not a factor in the issue of violation, although it may ultimately be an issue as to the amount of damages assessed.

Does the fact that the actions of the scraper annoy me, make any difference? I would answer, not in the least. Whether or not you are annoyed by the violation of the copyright makes no difference as to whether or not there is a violation. Likewise, you have no independent claims for your wounded feelings because of the copied content. Copyright is a statutory action (i.e. based on statutory law) and unless the cause of action is recognized by the law, there is no cause of action. Now, in an outrageous case, you may have  some kind of tort (personal injury) claim, but that is way outside of my hypothetical situation.

So what is the answer? Does scraping violate the originator's copyright? If only a small portion of the blog is copied (scraped) then I would have to have the opinion that it is not. Essentially, no matter what the motivation of the scrapper, there is not enough content copied to violate the fair use doctrine. Now, that is my opinion. Your's might differ. That is what makes lawsuits.

Do I think there are other reasons why scraping websites are objectionable? Certainly, but those reasons have nothing to do with copyright and they are probably the subject of another different blog post. So, if you are reading this from scraping website, bear in mind that there may be a serious problem with that type of website.

Source:http://genealogysstar.blogspot.in/2013/05/do-blog-scraping-sites-violate-blog.html

Local ScraperWiki Library

It quite annoyed me that you can only use the scraperwiki library on a ScraperWiki instance; most of it could work fine elsewhere. So I’ve pulled it out (well, for Python at least) so you can use it offline.

How to use
pip install scraperwiki_local
A dump truck dumping its payload

You can then import scraperwiki in scripts run on your local computer. The scraperwiki.sqlite component is powered by DumpTruck, which you can optionally install independently of scraperwiki_local.

pip install dumptruck

Differences

DumpTruck works a bit differently from (and better than) the hosted ScraperWiki library, but the change shouldn’t break much existing code. To give you an idea of the ways they differ, here are two examples:

Complex cell values
What happens if you do this?
import scraperwiki
shopping_list = ['carrots', 'orange juice', 'chainsaw']
scraperwiki.sqlite.save([], {'shopping_list': shopping_list})
On a ScraperWiki server, shopping_list is converted to its unicode representation, which looks like this:
[u'carrots', u'orange juice', u'chainsaw']
In the local version, it is encoded to JSON, so it looks like this:
["carrots","orange juice","chainsaw"]

And if it can’t be encoded to JSON, you get an error. And when you retrieve it, it comes back as a list rather than as a string.

Case-insensitive column names

SQL is less sensitive to case than Python. The following code works fine in both versions of the library.

In [1]: shopping_list = ['carrots', 'orange juice', 'chainsaw']
In [2]: scraperwiki.sqlite.save([], {'shopping_list': shopping_list})
In [3]: scraperwiki.sqlite.save([], {'sHOpPiNg_liST': shopping_list})
In [4]: scraperwiki.sqlite.select('* from swdata')

Out[4]: [{u'shopping_list': [u'carrots', u'orange juice', u'chainsaw']}, {u'shopping_list': [u'carrots', u'orange juice', u'chainsaw']}]

Note that the key in the returned data is ‘shopping_list’ and not ‘sHOpPiNg_liST’; the database uses the first one that was sent. Now let’s retrieve the individual cell values.

In [5]: data = scraperwiki.sqlite.select('* from swdata')
In [6]: print([row['shopping_list'] for row in data])
Out[6]: [[u'carrots', u'orange juice', u'chainsaw'], [u'carrots', u'orange juice', u'chainsaw']]

The code above works in both versions of the library, but the code below only works in the local version; it raises a KeyError on the hosted version.

In [7]: print(data[0]['Shopping_List'])
Out[7]: [u'carrots', u'orange juice', u'chainsaw']

Here’s why. In the hosted version, scraperwiki.sqlite.select returns a list of ordinary dictionaries. In the local version, scraperwiki.sqlite.select returns a list of special dictionaries that have case-insensitive keys.

Develop locally

Here’s a start at developing ScraperWiki scripts locally, with whatever coding environment you are used to. For a lot of things, the local library will do the same thing as the hosted. For another lot of things, there will be differences and the differences won’t matter.

If you want to develop locally (just Python for now), you can use the local library and then move your script to a ScraperWiki script when you’ve finished developing it (perhaps using Thom Neale’s ScraperWiki scraper). Or you could just run it somewhere else, like your own computer or web server. Enjoy!

Source:https://blog.scraperwiki.com/2012/06/local-scraperwiki-library/

A quick guide on web scraping: Why and how

Web scraping, which is the collection and cleaning of online data, is the first step in any
data-driven project. Here’s a short video that explains what scraping is, and how to create
automated scraping jobs using a digital tool.

This is a 15-minute video created by an instructor at Ohio State University. In the first six
minutes, the instructor talks about why we need web scraping; he then shows how to use a
scraping tool, OutWit Hub, to collect data scattered in a large database.

FYI: read reviews by Reporters’ Lab of OutWit Hub and other web scraping tools.

Source: http://www.mulinblog.com/quick-guide-web-scraping/

Scraping and Analyzing Angel List Syndicates: Kimono Labs + Silk

Because we use Silk to tell stories and visualize data, we are always looking for interesting ways to pull data into a Silk. Right now that means getting data into the CSV format. Fortunately, a wave of new and powerful visual webscraping tools and services have emerged. These make it very simple for anyone (no technical skills required) to scrape data from a website and export that data into a CSV which we can quickly upload into a Silk.

Cool New Scraping Tools

One of the tools we love in this new space is Kimono Labs. Backed by Y Combinator, Kimono combines a visual scraping editor with the ability to do very granular code-inspector level editing to scraping paths. Saved scrapes can be turned into APIs and exported as JSON. Kimono also lets you save time-series versioning of scrapes.

Data from angel-list-syndicates.silk.co

Like many startups, we watch the goings on at AngelList very closely. Syndicates are of particular interest. Basically, these are DIY venture capital pools that allow a qualified investor to serve as a syndicate leader and aggregate small investments from other qualified investors who are members of AngelList. The idea of the syndicates is to democratize the VC process and make it easier and less risky for individuals to participate.

We used Kimono to scrape information on the Top 25 Syndicates ranked by dollars backing each round. Kimono makes it very easy to visually designate which parts of a page to scrape and how many rows there are on a page. (Here you can see me highlighting the minimum dollar investment). We downloaded the information as a CSV and did a quick scrub to get it ready for upload to Silk. The process took no more than 15 minutes.

We could tell by eyeballing the numbers beforehand that a serious Power Law was in effect. And the actual data analysis on Silk bore this out. We chose to use a pie chart to show distribution. Three syndicates control nearly two-thirds of all the committed capital by Angel.co members in the syndicate program. One of the top three - Tim Ferriss - has no background as a venture capitalist or building technology companies but is rapidly becoming a force in startup investing. The person with the largest committed syndicate pool, Gil Penachina, is someone who is a quiet mover and shaker in Silicon Valley but he clearly packs a huge punch.

The largest syndicate in terms of likely commitments of deals per year is Foundry Group Angels, a group led by Brad Feld (@bfeld). While they put in less per deal, they are planning to back over 50 deals per year - a huge number. Trailing far behind those three was media impresario and Launch conference mogul Jason Calacanis, who is one of the most visible people in the startup space.

Source: http://blog.silk.co/post/83501793279/scraping-and-analyzing-angel-list-syndicates

Web Data Extraction / Scraping Data from Kitco Inc. Text Only Market Page

I wish to capture data from

<html>
<head>
<title>Text Only Market Page</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
</head>

<body bgcolor="#FFFFFF">
<br><br>
<pre>
<b><font size=6>
  Kitco Inc.

  Text Only Market Page</font></b>

    <a href="http://www.kitco.com/market/">Graphic version of this page</a>

    <a href="http://www.kitco.com/market/LFrate.html">Precious Metals Lease Rates</a> 
    <a href="http://www.kitco.com/gold.londonfix.html">Historical Price Data</a> 
    <a href="http://www.kitco.com/market/marketnews.html">Precious Metals News Headlines</a>

    <font size=4><b><a href="https://online.kitco.com/bullion/completelist_USD.html#gold">Buy gold and silver online direct from Kitco!</a>
   Live quotes for all bullion products.</b></font>


   --------------------------------------------------------------------------------
   London Fix          GOLD          SILVER       PLATINUM           PALLADIUM
                   AM       PM                  AM       PM         AM       PM
   --------------------------------------------------------------------------------
   Jun 19,2012   1628.50   1625.50   28.8100   1486.00   1486.00   629.00   634.00 
   Jun 18,2012   1623.50   1615.50   28.4300   1486.00   1484.00   626.00   628.00 
   --------------------------------------------------------------------------------


                  New York Spot Price
                MARKET IS OPEN
            Will close in 4 hour 25 minutes
   ----------------------------------------------------------------------
   Metals          Bid        Ask           Change        Low       High
   ----------------------------------------------------------------------
   Gold         1619.80     1620.80     -8.90  -0.55%    1616.60  1632.70
   Silver         28.46       28.56     -0.28  -0.97%      28.24    28.95
   Platinum     1479.00     1489.00      0.00   0.00%    1476.00  1500.00
   Palladium     627.00      632.00      0.00   0.00%     622.00   639.00
   ----------------------------------------------------------------------
   Last Update on Jun 19, 2012 at 12:50.59
   ----------------------------------------------------------------------


                Asia / Europe Spot Price
                MARKET IS OPEN
            Will close in 4 hours 25 minutes
   ----------------------------------------------------------------------
   Metals                      Bid          Ask      Change from NY close
   ----------------------------------------------------------------------
   Gold                      1619.80      1620.80     -8.90   -0.55%
   Silver                      28.46        28.56     -0.28   -0.97%
   Platinum                  1479.00      1489.00     +0.00   +0.00%
   Palladium                  627.00       632.00     +0.00   +0.00%
   ----------------------------------------------------------------------
   Last Update on Jun 19, 2012 at 12:50.59
   ----------------------------------------------------------------------


<b>   File created on Tue Jun 19 12:51:04 2012</b>


        <style type="text/css"><!--
 #main_container_footer {width:100%;text-align: center;}
    #main_container_footer #footer_container {width:auto; margin:25px auto 25px auto;}
    #main_container_footer #footer_container ul {margin:0; padding:0;}
    #main_container_footer #footer_container ul li {float:left; display:inline; list-style:none; padding:0 8px; font-family:Verdana, Arial, Helvetica, sans-serif; font-size:12px; color:#000; border-right:1px #000 solid;}
    #main_container_footer #footer_container ul li a {font-family:Verdana, Arial, Helvetica, sans-serif; font-size:12px; color:#000; text-decoration:underline; font-weight:normal;}
    #main_container_footer #footer_container ul li a:hover {color:#ac1a2f; text-decoration:none; font-weight:normal;}
    #main_container_footer #footer_container ul li.no_border {border:0px;}
--></style>
  <table border="0" cellspacing="0" cellpadding="0"><tr><td>
 <div id="main_container_footer">
        <div id="footer_container">
            <ul>
                <li class="no_border"><script type="text/javascript">
copyright=new Date();
update=copyright.getFullYear();
document.write("&copy; "+ update + " Kitco Metals Inc.");
</script></li>
                <li><a href="https://corp.kitco.com/index.html">About Us</a></li>
                <li><a href="http://www.kitco.com/TermsofUse/" target="_top" onclick="Window_open(this.href,'KITCO','top=120,left=250,width=500,height=350'); return false">Website Terms of Use</a></li>
                <li><a href="https://online.kitco.com/help/privacy_policy.html" target="_top" onclick="Window_open(this.href,'KITCO','top=120,left=250,width=500,height=350'); return false">Privacy Policy</a></li>
                <li><a href="http://www.kitco.com/ads/">Advertise With Us</a></li>
                <li><a href="https://corp.kitco.com/en/corporate_culture.html">Careers</a></li>
                <li><a href="https://corp.kitco.com/en/contact.html" target="_top" onclick="Window_open(this.href,'KITCO','top=120,left=250,width=500,height=350'); return false">Contact Us</a></li>
                <li class="no_border"><a href="https://corp.kitco.com/en/feedback.html" target="_top" onclick="Window_open(this.href,'KITCO','top=120,left=250,width=500,height=350'); return false">Feedback</a></li>
            </ul>
        </div>
    </div> 

    </td></tr></table><br /><br />
<script language="JavaScript" type="text/javascript">
<!--
function Window_open (Address) {
  NewWindow = window.open(Address, "Popup", "width=695,height=600,left=100,top=200,resizable=yes,scrollbars=yes");
  NewWindow.focus();
}
// -->
</script>
 <!-- img src="http://www.kitco.com/scripts/counter/counter.pl?txtonlyE.txt" width="1" height="1" -->
<!-- Google-Analytics Code-->
<script type="text/javascript">
  var _gaq = _gaq || [];
  _gaq.push(['_setAccount', 'UA-4074364-3']);
  _gaq.push(['_trackPageview']);

  (function() {
    var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true;
    ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js';
    var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(ga, s);
  })();
</script>
</body>
</html>

More specifically, I am looking to capture the following data:

--------------------------------------------------------------------------------
London Fix          GOLD          SILVER       PLATINUM           PALLADIUM
               AM       PM                  AM       PM         AM       PM
--------------------------------------------------------------------------------
Jun 19,2012   1628.50   NA        28.8100   1486.00   1486.00   629.00   634.00 
Jun 18,2012   1623.50   1615.50   28.4300   1486.00   1484.00   626.00   628.00 
--------------------------------------------------------------------------------

Does anybody have any suggestions how I can do this using PHP?



1 Answer



Quick and dirty regex method:

$data = file_get_contents('http://www.kitco.com/texten/texten.html');
preg_match_all('/([A-Z]{3,5}\s+[0-9]{1,2},[0-9]{4}\s+([0-9.NA]{2,10}\s+){1,7})/si',$data,$result);

$records = array();
foreach($result[1] as $date) {
    $temp = preg_split('/\s+/',$date);
    $index = array_shift($temp);
    $index.= array_shift($temp);
    $records[$index] = implode(',',$temp);
}
print_R($records);

Note, you'd probably want to add some validation, etc.


Source: http://stackoverflow.com/questions/11103001/web-data-extraction-scraping-data-from-kitco-inc-text-only-market-page

Scraping webdata from a website that loads data in a streaming fashion

I'm trying to scrape some data off of the FEC.gov website using python for a project of mine. Normally I use python

mechanize and beautifulsoup to do the scraping.

I've been able to figure out most of the issues but can't seem to get around a problem. It seems like the data is

streamed into the table and mechanize.Browser() just stops listening.

So here's the issue: If you visit http://query.nictusa.com/cgi-bin/can_ind/2011_P80003338/1/A ... you get the first 500

contributors whose last name starts with A and have given money to candidate P80003338 ... however, if you use

browser.open() at that url all you get is the first ~5 rows.

I'm guessing its because mechanize isn't letting the page fully load before the .read() is executed. I tried putting a

time.sleep(10) between the .open() and .read() but that didn't make much difference.

And I checked, there's no javascript or AJAX in the website (or at least none are visible when you use the 'view-

source'). SO I don't think its a javascript issue.

Any thoughts or suggestions? I could use selenium or something similar but that's something that I'm trying to avoid.

-Will

2 Answers

Why not use an html parser like lxml with xpath expressions.

I tried

>>> import lxml.html as lh
>>> data = lh.parse('http://query.nictusa.com/cgi-bin/can_ind/2011_P80003338/1/A')
>>> name = data.xpath('/html/body/table[2]/tr[5]/td[1]/a/text()')
>>> name
[' AABY, TRYGVE']
>>> name = data.xpath('//table[2]/*/td[1]/a/text()')
>>> len(name)
500
>>> name[499]
' AHMED, ASHFAQ'
>>>



Similarly, you can create xpath expression of your choice to work with.


Source: http://stackoverflow.com/questions/9435512/scraping-webdata-from-a-website-that-loads-data-in-a-streaming-

fashion

How can I circumvent page view limits when scraping web data using Python?

I am using Python to scrape US postal code population data from http:/www.city-data.com, through this directory: http://www.city-data.com/zipDir.html. The specific pages I am trying to scrape are individual postal code pages with URLs like this: http://www.city-data.com/zips/01001.html. All of the individual zip code pages I need to access have this same URL Format, so my script simply does the following for postal_code in range:

    Creates URL given postal code
    Tries to get response from URL
    If (2), Check the HTTP of that URL
    If HTTP is 200, retrieves the HTML and scrapes the data into a list
    If HTTP is not 200, pass and count error (not a valid postal code/URL)
    If no response from URL because of error, pass that postal code and count error
    At end of script, print counter variables and timestamp

The problem is that I run the script and it works fine for ~500 postal codes, then suddenly stops working and returns repeated timeout errors. My suspicion is that the site's server is limiting the page views coming from my IP address, preventing me from completing the amount of scraping that I need to do (all 100,000 potential postal codes).

My question is as follows: Is there a way to confuse the site's server, for example using a proxy of some kind, so that it will not limit my page views and I can scrape all of the data I need?

Thanks for the help! Here is the code:

##POSTAL CODE POPULATION SCRAPER##

import requests

import re

import datetime

def zip_population_scrape():

    """
    This script will scrape population data for postal codes in range
    from city-data.com.
    """
    postal_code_data = [['zip','population']] #list for storing scraped data

    #Counters for keeping track:
    total_scraped = 0
    total_invalid = 0
    errors = 0


    for postal_code in range(1001,5000):

        #This if statement is necessary because the postal code can't start
        #with 0 in order for the for statement to interate successfully
        if postal_code <10000:
            postal_code_string = str(0)+str(postal_code)
        else:
            postal_code_string = str(postal_code)

        #all postal code URLs have the same format on this site
        url = 'http://www.city-data.com/zips/' + postal_code_string + '.html'

        #try to get current URL
        try:
            response = requests.get(url, timeout = 5)
            http = response.status_code

            #print current for logging purposes
            print url +" - HTTP:  " + str(http)

            #if valid webpage:
            if http == 200:

                #save html as text
                html = response.text

                #extra print statement for status updates
                print "HTML ready"

                #try to find two substrings in HTML text
                #add the substring in between them to list w/ postal code
                try:           

                    found = re.search('population in 2011:</b> (.*)<br>', html).group(1)

                    #add to # scraped counter
                    total_scraped +=1

                    postal_code_data.append([postal_code_string,found])

                    #print statement for logging
                    print postal_code_string + ": " + str(found) + ". Data scrape successful. " + str(total_scraped) + " total zips scraped."
                #if substrings not found, try searching for others
                #and doing the same as above   
                except AttributeError:
                    found = re.search('population in 2010:</b> (.*)<br>', html).group(1)

                    total_scraped +=1

                    postal_code_data.append([postal_code_string,found])
                    print postal_code_string + ": " + str(found) + ". Data scrape successful. " + str(total_scraped) + " total zips scraped."

            #if http =404, zip is not valid. Add to counter and print log        
            elif http == 404:
                total_invalid +=1

                print postal_code_string + ": Not a valid zip code. " + str(total_invalid) + " total invalid zips."

            #other http codes: add to error counter and print log
            else:
                errors +=1

                print postal_code_string + ": HTTP Code Error. " + str(errors) + " total errors."

        #if get url fails by connnection error, add to error count & pass
        except requests.exceptions.ConnectionError:
            errors +=1
            print postal_code_string + ": Connection Error. " + str(errors) + " total errors."
            pass

        #if get url fails by timeout error, add to error count & pass
        except requests.exceptions.Timeout:
            errors +=1
            print postal_code_string + ": Timeout Error. " + str(errors) + " total errors."
            pass


    #print final log/counter data, along with timestamp finished
    now= datetime.datetime.now()
    print now.strftime("%Y-%m-%d %H:%M")
    print str(total_scraped) + " total zips scraped."
    print str(total_invalid) + " total unavailable zips."
    print str(errors) + " total errors."



Source: http://stackoverflow.com/questions/25452798/how-can-i-circumvent-page-view-limits-when-scraping-web-data-using-python

Web data scraping (online news comments) with Scrapy (Python)

Since you seem like the try-first ask-question later type (that's a very good thing), I won't give you an answer, but a

(very detailed) guide on how to find the answer.

The thing is, unless you are a yahoo developer, you probably don't have access to the source code you're trying to

scrape. That is to say, you don't know exactly how the site is built and how your requests to it as a user are being

processed on the server-side. You can, however, investigate the client-side and try to emulate it. I like using Chrome

Developer Tools for this, but you can use others such as FF firebug.

So first off we need to figure out what's going on. So the way it works, is you click on the 'show comments' it loads

the first ten, then you need to keep clicking for the next ten comments each time. Notice, however, that all this

clicking isn't taking you to a different link, but lively fetches the comments, which is a very neat UI but for our

case requires a bit more work. I can tell two things right away:

    They're using javascript to load the comments (because I'm staying on the same page).
    They load them dynamically with AJAX calls each time you click (meaning instead of loading the comments with the

page and just showing them to you, with each click it does another request to the database).

Now let's right-click and inspect element on that button. It's actually just a simple span with text:

<span>View Comments (2077)</span>

By looking at that we still don't know how that's generated or what it does when clicked. Fine. Now, keeping the

devtools window open, let's click on it. This opened up the first ten. But in fact, a request was being made for us to

fetch them. A request that chrome devtools recorded. We look in the network tab of the devtools and see a lot of

confusing data. Wait, here's one that makes sense:

http://news.yahoo.com/_xhr/contentcomments/get_comments/?content_id=42f7f6e0-7bae-33d3-aa1d-

3dfc7fb5cdfc&_device=full&count=10&sortBy=highestRated&isNext=true&offset=20&pageNumber=2&_media.modules.content_commen

ts.switches._enable_view_others=1&_media.modules.content_comments.switches._enable_mutecommenter=1&enable_collapsed_com

ment=1

See? _xhr and then get_comments. That makes a lot of sense. Going to that link in the browser gave me a JSON object

(looks like a python dictionary) containing all the ten comments which that request fetched. Now that's the request you

need to emulate, because that's the one that gives you what you want. First let's translate this to some normal reqest

that a human can read:

go to this url: http://news.yahoo.com/_xhr/contentcomments/get_comments/
include these parameters: {'_device': 'full',
          '_media.modules.content_comments.switches._enable_mutecommenter': '1',
          '_media.modules.content_comments.switches._enable_view_others': '1',
          'content_id': '42f7f6e0-7bae-33d3-aa1d-3dfc7fb5cdfc',
          'count': '10',
          'enable_collapsed_comment': '1',
          'isNext': 'true',
          'offset': '20',
          'pageNumber': '2',
          'sortBy': 'highestRated'}

Now it's just a matter of trial-and-error. However, a few things to note here:

    Obviously the count is what decides how many comments you're getting. I tried changing it to 100 to see what

happens and got a bad request. And it was nice enough to tell me why - "Offset should be multiple of total rows". So

now we understand how to use offset

    The content_id is probably something that identifies the article you are reading. Meaning you need to fetch that

from the original page somehow. Try digging around a little, you'll find it.

    Also, you obviously don't want to fetch 10 comments at a time, so it's probably a good idea to find a way to fetch

the number of total comments somehow (either find out how the page gets it, or just fetch it from within the article

itself)

    Using the devtools you have access to all client-side scripts. So by digging you can find that that link to

/get_comments/ is kept within a javascript object named YUI. You can then try to understand how it is making the

request, and try to emulate that (though you can probably figure it out yourself)

    You might need to overcome some security measures. For example, you might need a session-key from the original

article before you can access the comments. This is used to prevent direct access to some parts of the sites. I won't

trouble you with the details, because it doesn't seem like a problem in this case, but you do need to be aware of it in

case it shows up.

    Finally, you'll have to parse the JSON object (python has excellent built-in tools for that) and then parse the

html comments you are getting (for which you might want to check out BeautifulSoup).

As you can see, this will require some work, but despite all I've written, it's not an extremely complicated task

either.

So don't panic.

It's just a matter of digging and digging until you find gold (also, having some basic WEB knowledge doesn't hurt).

Then, if you face a roadblock and really can't go any further, come back here to SO, and ask again. Someone will help

you.


Source: http://stackoverflow.com/questions/20218855/web-data-scraping-online-news-comments-with-scrapy-python

A good web data extraction/screen scraper program?

I need to capture product data from a site on a regular basis and wondered if any one knows of a good software program? I've trialed Mozenda but its a monthly subscription and pricey in the long term. Obviously something thats free would be best but I don't mind paying either. Just need a decent program thats reliable and doesn't require much programming knowledge.

You can try ScraperWiki.com if you know python.

I've experimented with Screen-Scraper and found it easy to use. The application comes in multiple versions: basic (which is free), professional, and enterprise. Also, multiple platforms are supported.

Hire a programmer to do it so that there is only a one off cost. I often see similar projects on freelancing websites like Elance and oDesk.

I really like iMacros. You can give it a test drive to see if it meets your needs with the totally free Firefox extension (there's also IE versions), but there are also more full featured application and "server" versions that have more features and ability to do thing in an unattended manner.

Here are some other alternatives to consider:

    License the data from the provider. Call em up and ask 'em.

    Use Amazon Mechanical Turk to get humans to copy and paste and format it for ya. They are cheap.

    For automation, it depends on how complicated the HTML is and how often it changes. You could use Excel's Web Data Import if it's really simple.


You can use irobot from IRobotSoft, which is totally free, and provides more functionalityies than other paid software. Watch demos here http://irobotsoft.com/help/ for how simple it is.

Questions on their forum were answered very quickly.


Source: http://stackoverflow.com/questions/2334164/a-good-web-data-extraction-screen-scraper-program

How to login to website and extract data using PHP [closed]

I have installed the tiny tiny rss on to my computer (Windows) and also have Xampp installed (localhost).

I want to be able to use PHP to extract data from the Tiny tiny RSS webpage.

I have tried this it which just opens the front page:

<?php
$homepage = file_get_contents('my install tiny tiny rss url');
echo $homepage;
?>

But how do I login and extract the data.

You can use cURL to send post data and headers. To login you need to replicate the exact data exchange between the client and the server.


SOurce: http://stackoverflow.com/questions/20611918/how-to-login-to-website-and-extract-data-using-php

Is it ok to scrape data from Google results?

I'd like to fetch results from Google using curl to detect potential duplicate content. Is there a high risk of being banned by Google?

Google will eventually block your IP when you exceed a certain amount of requests.



Google disallows automated access in their TOS, so if you accept their terms you would break them.

That said, I know of no lawsuit from Google against a scraper. Even Microsoft scraped Google, they powered their search engine Bing with it. They got caught in 2011 red handed :)

There are two options to scrape Google results:

1) Use their API

    You can issue around 40 requests per hour You are limited to what they give you, it's not really useful if you want to track ranking positions or what a real user would see. That's something you are not allowed to gather.

    If you want a higher amount of API requests you need to pay.
    60 requests per hour cost 2000 USD per year, more queries require a custom deal.

2) Scrape the normal result pages

    Here comes the tricky part. It is possible to scrape the normal result pages. Google does not allow it.
    If you scrape at a rate higher than 15 keyword requests per hour you risk detection, higher than 20/h will get you blocked from my experience.
    By using multiple IPs you can up the rate, so with 100 IP addresses you can scrape up to 2000 requests per hour. (50k a day)
    There is an open source search engine scraper written in PHP at http://scraping.compunect.com It allows to reliable scrape Google, parses the results properly and manages IP addresses, delays, etc. So if you can use PHP it's a nice kickstart, otherwise the code will still be useful to learn how it is done.


Source: http://stackoverflow.com/questions/22657548/is-it-ok-to-scrape-data-from-google-results

Data Scraping from PDF and Excel

I am doing a little data scraping, There are 3 types of file from which i am scraping data.

1- HTML
2- PDF
3- Excel(xls)

For HTML i am comfortable, i am using HTML Agility for that.

For PDF and excel i need suggestions from anyone.



Concerning Excel. If you are in a MS environment you can either do Office Automation or use OLEDB. In a Java

environment look at Apache POI.

EDIT: Concerning PDF in Java try Apache PDFBox . Can also work in .NET using IKVM

I can recommend Cogniview's PDF2XL, a reasonably inexpensive commercial product, to extract data from tables in PDF

files into Excel. We have used it with great success.

HTML Agility is a library. Its good to use. But then, why do you need separate tools for different data extraction

purposes? Use Automation Anywhere to extract data from any source. As far as I know, it would work for all the three

sources you have specified. Google it.

Source: http://stackoverflow.com/questions/3147803/data-scraping-from-pdf-and-excel

How to be a good citizen when crawling web sites?

I'm going to be developing some functionality that will crawl various public web sites and process/aggregate the data on them. Nothing sinister like looking for e-mail addresses - in fact it's something that might actually drive additional traffic to their sites. But I digress.

Other than honouring robots.txt, are there any rules or guidelines, written or unwritten, that I ought to be following in order to (a) avoid appearing malicious and potentially being banned, and (b) not cause any problems for the site owners/webmasters?

Some examples I can think of which may or may not matter:

    Number of parallel requests
    Time between requests
    Time between entire crawls
    Avoiding potentially destructive links (don't want to be the Spider of Doom - but who knows if this is even practical)

That's really just spit-balling, though; is there any tried-and-tested wisdom out there that's broadly applicable for anybody who intends to write or utilize a spider?




Besides obeying robots.txt, obey nofollow and noindex in <meta> elements and links:

    There are many who believe robots.txt is not the proper way to block indexing and because of that viewpoint, have instructed many site owners to rely on the <meta name="robots" content="noindex"> tag to tell web crawlers not to index a page.

    If you're trying to make a graph of connections between websites (anything similar to PageRank), (and <meta name="robots" content="nofollow">) is supposed to indicate the source site doesn't trust the destination site enough to give it a proper endorsement. So while you can index the destination site, you ought not store the relation between the two sites.

SEO is more of an art than a real science, and it's practiced by a lot of people who know what they're doing, and a lot of people who read the executive summaries of people who know what they're doing. You're going to run into issues where you'll get blocked from sites for doing things that other sites found perfectly acceptable due to some rule someone overheard or read in a blog post on SEOmoz that may or may not be interpreted correctly.

Because of that human element, unless you are Google, Microsoft, or Yahoo!, you are presumed malicious unless proven otherwise. You need to take extra care to act as though you are no threat to a web site owner, and act in accordance with how you would want a potentially malicious (but hopefully benign) crawler to act:

    stop crawling a site once you detect you're being blocked: 403/401s on pages you know work, throttling, time-outs, etc.
    avoid exhaustive crawls in relatively short periods of time: crawl a portion of the site, and come back later on (a few days later) to crawl another portion. Don't make parallel requests.
    avoid crawling potentially sensitive areas: URLs with /admin/ in them, for example.

Even then, it's going to be an up-hill battle unless you resort to black-hat techniques like UA spoofing or purposely masking your crawling patterns: many site owners, for the same reasons above, will block an unknown crawler on sight instead of taking the chance that there's someone not trying to "hack their site". Prepare for a lot of failure.

One thing you could do to combat the negative image an unknown crawler is going to have is to make it clear in your user-agent string who you are:

Aarobot Crawler 0.9 created by John Doe. See http://example.com/aarobot.html for more information.

Where http://example.com/aarobot.html explains what you're trying to accomplish and why you're not a threat. That page should have a few things:

    Information on how to contact you directly
    Information about what the crawler collects and why it's collecting it
    Information on how to opt-out and have any data collected deleted

That last one is key: a good opt-out is like a Money Back Guarantee™ and scores an unreasonable amount of goodwill. It should be humane: one simple step (either an email address or, ideally, a form) and comprehensive (there shouldn't be any "gotchas": opt-out means you stop crawling without exception).


Source: http://programmers.stackexchange.com/questions/91760/how-to-be-a-good-citizen-when-crawling-web-sites

Excel VBA Data Mining Real-Time Data from a Web Page that Refreshes Data

I want to capture real-time data that updates into a table on a webpage; I prefer capturing it into excel using VBA, but I will write it in .NET C# or VB if I that is easier.

the data updates about 1 or 2 seconds, and I want to just grab the latest data quotes and log it into my spreadsheet; the table names are the same, only the data refreshes, and it does so automatically on the web page.

I've done a lot of Excel VBA and I know how to download a URL to a file--this is NOT what I want; I want to gain access to my webpage that is active and grab the data updates after I've logged into my site and selected a webpage that I like.

Is there a simple way to access this data on the webpage from Excel or .Net? Because it refreshes no more than once every 1 or 2 seconds, it is easy to just keep checking it for updates, and I can compare the latest data to see if it actually refreshed.


In Excel 2003, use Data/Import External Data/New Web Query
Browse to your page and select the table you want to import.
After that you can either do a manual Refresh, or use a timer procedure to do something like:

Source: http://stackoverflow.com/questions/9855794/excel-vba-data-mining-real-time-data-from-a-web-page-that-refreshes-data

Need to pull data from a website…web query? macro?

I have a list of every DOT # (Dept. of Trans.) in the country. I want to find out insurance effective date for each one of these companies. If you go to http://li-public.fmcsa.dot.gov --> "continue" --> then from the dropdown select "carrier search" and hit "go" it'll take you to a search form (that is the only way to get to this screen).

From there, you can input a DOT # X (use 61222 as an example) and it'll bring you to another screen. Click "view report in HTML" and then down on the bottom you'll see "Active/Pending Insurance". I want to pull the "effective date" from that page and stick it in the spreadsheet next to the DOT # X that I already know.

Of the thousands of DOT #'s in my list, not all will have filings on this website, if that makes a difference.

Can this be done with a Macro or Excel Web Query? I know I probably sound like a total novice, but I'd appreciate any help I could get.

Can you do it? Frankly even if you could you'd lock up the spreadsheet while it's doing that processing. And in the end, how would you handle an error half-way through?

I'd not do this in a client-facing application. This sounds more like something to do in server-side app that can do the processing and gather the information in a more controlled environment. Then you Excel spreadsheet could query that app and get the information in one fell swoop. Error handling is much simpler and you don't end up sitting there staring at Excel why it works its way through thousands of web sites. It was not built to do that elegantly.

What do you write the web service I'm describing in? Well it depends on your preference. Me, I'd write it in Ruby on Rails since it can easily handle the scraping aspect of the task and can report the data out easily as well. But it really falls back to whatever you're most comfortable coding in.


Source: http://stackoverflow.com/questions/15286429/need-to-pull-data-from-a-website-web-query-macro

How to extract data from web 2.0 graphs using a scraper

I have recently come across a web page containing a graph object that displays the (x, y) values on the object as the mouse is rolled across it. Is there any way to automate the extraction of this data?

How is the graph data loaded? If embedded in the page source then you can extract it with xpath or regex. Else use Firebug to see how it is loaded.



You will need a solution that works inside the web browser, so the AJAX/Javascript is properly rendered.

I have used iMacros with good success for web scraping in the past. There are free/open-source and "PRO" paid editions (comparison table here).

Another option is always to custom code something with the Microsoft webbrowser control.


Source: http://stackoverflow.com/questions/3980774/how-to-extract-data-from-web-2-0-graphs-using-a-scraper

Legality of Web Scraping vs Normal Use

I know the topic of web scraping has been discussed before (example), and I understand it's a bit of a grey area depending on a lot of factors (e.g. website's terms of use).

What I'd like to ask is: how is web scraping any different from (a) how we access the webpage via a web browser, and (b) how web crawlers (e.g. Google) download and index webpages?

Without knowing the legal background, I can't help but think that they're all just HTTP requests. If web scraping is illegal, then so should crawling and indexing (for instance be illegal).

Of course if your program is hitting the server so hard that it causes a denial of service, it's a different story altogether... my point is simply accessing and using data that is already open to the public.



I know this is a dead thread, but it would be nice to place some legal implications here due to its ranking in my Google Search. I cannot help but figure I am not the only one who searches like I do.

Legally, in the US, there are a few factors that seem to be important.

    Are you doing anything that is akin to hacking or gaining unauthorized access via the Computer Fraud and Abuse Act. Exploiting vulnerabilities and passing SQL in the URL to open a database no matter how bad the idiot programming like that was is illegal with a 15 year sentence (see the cases where an individual exploited security vulnerabilities in Verizon). Also, add a time out even if you round robin or use proxies. DDoS attacks are attacks. 1000 requests per second can shut down a lot of servers providing public information. The result here is up to 15 years in jail.

    Copyright Law: As mentioned, pure replication of data is illegal. Even 4% replication has been deemed a breach. With the recent gutting of the DMCA, a person is even more vulnerable to civil and criminal penalties.

    Trespass and Chattels: The following from wikipedia says it all.

    U.S. courts have acknowledged that users of "scrapers" or "robots" may be held liable for committing trespass to chattels,[5][6] which involves a computer system itself being considered personal property upon which the user of a scraper is trespassing. The best known of these cases, eBay v. Bidder's Edge, resulted in an injunction ordering Bidder's Edge to stop accessing, collecting, and indexing auctions from the eBay web site.

    Paywalls and Product: When going behind paywalls and breaching contract by clicking an agreement not to do something and then doing it, you add fuel to the protection of negligence v. willingness [an issue for damages and penalties not guilt] in civil and any criminal trials. (sorry originally wanted to say ignorance but it really isn't a defense)

    International: EU law and other law is way more lax. Corporations with big budgets dominate our legal landscape. They control the system in a very real way with their $$$.

Basically, get public information and information that is available without going behind a pay wall. Think like a user of the internet and combine a bunch of sources into a unique product. Don't just 'steal' an entire site (it isn't really stealing if it is a government site that offers public data especially for download but is if you download all or even more than a couple of the listings on ebay). Read the terms and conditions to know who actually owns the content.

Here are a few examples. Trulia owns its information but you could use it to go to an agents website and collect a legal amount of information. The legal amount is determinable. However, a public MLS listing lookup site with no agreement or terms and offering data to the public is fair game. The MLS numbers lists, however, are normally not fair game.

If a researcher can get to data, so can you. If a researcher needs permission, so do you. A computer is like having a million corporate researchers at your disposal.

AS for company policy, it is usually used internally to shield from liability and serves as a warning but is not entirely enforceable. The legal parts letting you know about copyrights and such are and usually are supposed to be known by everyone. Complete ignorance is not a legal protection. It does provide a ground set of rules. Be nice, or get banned is that message as far as I know.

My personal strategy is to start with public data and embellish it within legal means.


Source: http://stackoverflow.com/questions/14735791/legality-of-web-scraping-vs-normal-use

Anyone knows an online tool that can scrape a page and create a REST API for the scraped data?

I'm looking for a SaaS solution that is able to login to a platform, scrape data (reports) and then allow accessing the data through an API. I have some reporting platforms that provide web reporting and email reporting but with no API. Online reporting doesn't help and email reporting, although can be automated and scraped, isn't so reliable.

If you are willing to do the scraping through your own connection, have a look at Import IO. They have a desktop application that you use to teach the system how to scrape a page, and then you run the crawler from that application - and you can run it for as long as you like, as far as I can tell.

You may then upload your data to the Import cloud, from where it is available via an API on the import.io servers. Useful data can be made public to donate it "to the commons" if you wish.


I did some more digging, found iMacros as a possible solution. Its Windows based, which is a drawback in my case, but it does allow automation of the scraping and afterwards interaction via common web scripting languages like PHP and ASP.net.


If you are familiar with jQuery, I think you can use node.js and Cheerio module, then you can create a simple application to do auto scraping. Actually I have already built a site to do on line web scraping based on the above mentioned tech, the site is www.datafiddle.net, you can take a look at it.


Source: http://stackoverflow.com/questions/19646028/anyone-knows-an-online-tool-that-can-scrape-a-page-and-create-a-rest-api-for-the

Extract data from Web Scraping C#

I am MVC ASP.NET developer.

I have received the contents from any url, i.e. http, https etc. using WebRequest class.

I have received all the content of that particular url. (for now I took http://google.com)

My next step is to extract buttons, header, footer, colors, text etc.

Here is my code for now:

public ActionResult GetContent(UrlModel model) //model having a string URL
which is entered in a text box and method hits using submit button.
{
    //WebRequest request = WebRequest.Create(model.URL);

    WebRequest request = WebRequest.Create(model.URL);

    request.Credentials = CredentialCache.DefaultCredentials;

    WebResponse response = request.GetResponse();

    Stream dataStream = response.GetResponseStream();

    StreamReader reader = new StreamReader(dataStream);

    string responseFromServer = reader.ReadToEnd();
    ViewBag.Response = responseFromServer;

    reader.Close();
    response.Close();
    return View();
}

Can someone help me with writing the code ?

Also do suggest me with some techniques of data extraction in C#.



Source: http://stackoverflow.com/questions/21901162/extract-data-from-web-scraping-c-sharp

Scrapy, scraping price data from StubHub

I've been having a difficult time with this one.

I want to scrape all the prices listed for this Bruno Mars concert at the Hollywood Bowl so I can get the average price.

http://www.stubhub.com/bruno-mars-tickets/bruno-mars-hollywood-hollywood-bowl-31-5-2014-4449604/

I've located the prices in the HTML and the xpath is pretty straightforward but I cannot get any values to return.

I think it has something to do with the content being generated via javascript or ajax but I can't figure out how to send the correct request to get the code to work.

Here's what I have:

from scrapy.spider import BaseSpider
from scrapy.selector import Selector

from deeptix.items import DeeptixItem

class TicketSpider(BaseSpider):
    name = "deeptix"
    allowed_domains = ["stubhub.com"]
    start_urls = ["http://www.stubhub.com/bruno-mars-tickets/bruno-mars-hollywood-hollywood-bowl-31-5-2014-4449604/"]

def parse(self, response):
    sel = Selector(response)
    sites = sel.xpath('//div[contains(@class, "q_cont")]')
    items = []
    for site in sites:
        item = DeeptixItem()
        item['price'] = site.xpath('span[contains(@class, "q")]/text()').extract()
        items.append(item)
    return items

Any help would be greatly appreciated I've been struggling with this one for quite some time now. Thank you in advance!


Source: http://stackoverflow.com/questions/22770917/scrapy-scraping-price-data-from-stubhub

How do you scrape AJAX pages?

Overview:

All screen scraping first requires manual review of the page you want to extract resources from. When dealing with AJAX you usually just need to analyze a bit more than just simply the HTML.

When dealing with AJAX this just means that the value you want is not in the initial HTML document that you requested, but that javascript will be exectued which asks the server for the extra information you want.

You can therefore usually simply analyze the javascript and see which request the javascript makes and just call this URL instead from the start.

Example:

Take this as an example, assume the page you want to scrape from has the following script:

<script type="text/javascript">
function ajaxFunction()
{
var xmlHttp;
try
  {
  // Firefox, Opera 8.0+, Safari
  xmlHttp=new XMLHttpRequest();
  }
catch (e)
  {
  // Internet Explorer
  try
    {
    xmlHttp=new ActiveXObject("Msxml2.XMLHTTP");
    }
  catch (e)
    {
    try
      {
      xmlHttp=new ActiveXObject("Microsoft.XMLHTTP");
      }
    catch (e)
      {
      alert("Your browser does not support AJAX!");
      return false;
      }
    }
  }
  xmlHttp.onreadystatechange=function()
    {
    if(xmlHttp.readyState==4)
      {
      document.myForm.time.value=xmlHttp.responseText;
      }
    }
  xmlHttp.open("GET","time.asp",true);
  xmlHttp.send(null);
  }
</script>

Then all you need to do is instead do an HTTP request to time.asp of the same server instead. Example from w3schools.


Sporce: http://stackoverflow.com/questions/260540/how-do-you-scrape-ajax-pages

using Perl to scrape a website

I am interested in writing a perl script that goes to the following link and extracts the number 1975: https://familysearch.org/search/collection/results#count=20&query=%2Bevent_place_level_1%3ACalifornia%20%2Bevent_place_level_2%3A%22San%20Diego%22%20%2Bbirth_year%3A1923-1923~%20%2Bgender%3AM%20%2Brace%3AWhite&collection_id=2000219

That website is the amount of white men born in the year 1923 who live in San Diego County, California in 1940. I am trying to do this in a loop structure to generalize over multiple counties and birth years.

In the file, locations.txt, I put the list of counties, such as San Diego County.

The current code runs, but instead of the # 1975, it displays unknown. The number 1975 should be in $val\n.

I would very much appreciate any help!

#!/usr/bin/perl

use strict;

use LWP::Simple;

open(L, "locations26.txt");

my $url = 'https://familysearch.org/search/collection/results#count=20&query=%2Bevent_place_level_1%3A%22California%22%20%2Bevent_place_level_2%3A%22%LOCATION%%22%20%2Bbirth_year%3A%YEAR%-%YEAR%~%20%2Bgender%3AM%20%2Brace%3AWhite&collection_id=2000219';

open(O, ">out26.txt");
 my $oldh = select(O);
 $| = 1;
 select($oldh);
 while (my $location = <L>) {
     chomp($location);
     $location =~ s/ /+/g;
      foreach my $year (1923..1923) {
                 my $u = $url;
                 $u =~ s/%LOCATION%/$location/;
                 $u =~ s/%YEAR%/$year/;
                 #print "$u\n";
                 my $content = get($u);
                 my $val = 'unknown';
                 if ($content =~ / of .strong.([0-9,]+)..strong. /) {
                         $val = $1;
                 }
                 $val =~ s/,//g;
                 $location =~ s/\+/ /g;
                 print "'$location',$year,$val\n";
                 print O "'$location',$year,$val\n";
         }
     }

Update: API is not a viable solution. I have been in contact with the site developer. The API does not apply to that part of the webpage. Hence, any solution pertaining to JSON will not be applicbale.



Source: http://stackoverflow.com/questions/14654288/using-perl-to-scrape-a-website

Data Scraping using php

Here is my code

    $ip=$_SERVER['REMOTE_ADDR'];

    $url=file_get_contents("http://whatismyipaddress.com/ip/$ip");

    preg_match_all('/<th>(.*?)<\/th><td>(.*?)<\/td>/s',$url,$output,PREG_SET_ORDER);

    $isp=$output[1][2];

    $city=$output[9][2];

    $state=$output[8][2];

    $zipcode=$output[12][2];

    $country=$output[7][2];

    ?>
    <body>
    <table align="center">
    <tr><td>ISP :</td><td><?php echo $isp;?></td></tr>
    <tr><td>City :</td><td><?php echo $city;?></td></tr>
    <tr><td>State :</td><td><?php echo $state;?></td></tr>
    <tr><td>Zipcode :</td><td><?php echo $zipcode;?></td></tr>
    <tr><td>Country :</td><td><?php echo $country;?></td></tr>
    </table>
    </body>

How do I find out the ISP provider of a person viewing a PHP page?

Is it possible to use PHP to track or reveal it?

Error: http://i.imgur.com/LGWI8.png

Curl Scrapping

<?php
$curl_handle=curl_init();
curl_setopt( $curl_handle, CURLOPT_FOLLOWLOCATION, true );
$url='http://www.whatismyipaddress.com/ip/132.123.23.23';
curl_setopt($curl_handle, CURLOPT_URL,$url);
curl_setopt($curl_handle, CURLOPT_HTTPHEADER, Array("User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.8.1.15) Gecko/20080623 Firefox/2.0.0.15") );
curl_setopt($curl_handle, CURLOPT_CONNECTTIMEOUT, 2);
curl_setopt($curl_handle, CURLOPT_RETURNTRANSFER, 1);
curl_setopt($curl_handle, CURLOPT_USERAGENT, 'Your application name');
$query = curl_exec($curl_handle);

curl_close($curl_handle);
preg_match_all('/<th>(.*?)<\/th><td>(.*?)<\/td>/s',$url,$output,PREG_SET_ORDER);
echo $query;
$isp=$output[1][2];

$city=$output[9][2];

$state=$output[8][2];

$zipcode=$output[12][2];

$country=$output[7][2];
?>
<body>
<table align="center">
<tr><td>ISP :</td><td><?php echo $isp;?></td></tr>
<tr><td>City :</td><td><?php echo $city;?></td></tr>
<tr><td>State :</td><td><?php echo $state;?></td></tr>
<tr><td>Zipcode :</td><td><?php echo $zipcode;?></td></tr>
<tr><td>Country :</td><td><?php echo $country;?></td></tr>
</table>
</body>

Error: http://i.imgur.com/FJIq6.png

What's is wrong with my code here? Any alternative code , that i can use here.

I am not able to scrape that data as described here. http://i.imgur.com/FJIq6.png

P.S. Please post full code. It would be easier for me to understand.



Source: http://stackoverflow.com/questions/10461088/data-scraping-using-php

PDF scraping using R

I have been using the XML package successfully for extracting HTML tables but want to extend to PDF's. From previous questions it does not appear that there is a simple R solution but wondered if there had been any recent developments

Failing that, is there some way in Python (in which I am a complete Novice) to obtain and manipulate pdfs so that I could finish the job off with the R XML package

Extracting text from PDFs is hard, and nearly always requires lots of care.

I'd start with the command line tools such as pdftotext and see what they spit out. The problem is that PDFs can store the text in any order, can use awkward font encodings, and can do things like use ligature characters (the joined up 'ff' and 'ij' that you see in proper typesetting) to throw you.

pdftotext is installable on any Linux system



Source: http://stackoverflow.com/questions/7918718/pdf-scraping-using-r