Hand Scraped Flooring: Points to Keep in Mind

The demand for hand-scraped flooring is growing. Yet, this type of flooring, in terms of appearance, isn't like any other. If you are one of the many considering it for your home, what points do you need to keep in mind as you look for the right type of hand-scraped hardwood?

First, nearly all species – domestic and exotic – are available as this distressed variety. Species from white oak to Brazilian cherry are all available with this distressed and rustic look. And, any floor of a building can have hand-scraped flooring, as both solid and engineered types are distressed. As you look at different types of hand-scraped flooring, think about where you will be installing it into your home, and plan accordingly with the right type of solid or engineered hardwood.

What's most notable about hand-scraped hardwood is its creation. All planks are distressed by hand, and as a result, no two appear similar. Multiple methods are used for distressing hardwood, including the following techniques for aging, scraping, or finishing.

Aged hardwood goes by one of two names: Time Worn Aged or Antique. Both are similar, but a lower grade is used for Antique flooring. In addition to being aged, the hardwood's distressed appearance is accented further through darker staining, highlighting the grain, or contouring.

Scraping techniques alter the texture of the hardwood, making an otherwise smooth surface rough. Wire Brushed is a term used to indicate hand-scraped flooring with removed sapwood and accented grain. Hand-sculpted, on the other hand, still has texture but is smoother than other varieties. Hardwood that is Hand Hewn and Rough Sawn has the roughest texture for hand-scraped flooring, with even saw marks visible.

Flooring that uses finish to give hardwood an aged texture is usually sold as French Bleed. Such hand-scraped flooring has deeper beveled edges, and the joints of the floor are highlighted with darker stain. Also a somewhat superficial type of hand-scraped flooring is pegged. Considered to be decorative only, pegged flooring must not be fastened directly onto a subfloor.

If you want an even less uniform appearance for your floor, consider having it custom distressed. In this case, after the unfinished hardwood is installed, a professional comes in to alter it through beating with chains, pickeling, fastening with antique nails, or bleaching. After, a finish is applied.

Also as you look at hand-scraped hardwood, think about your flooring long term. Will you want a distressed appearance a decade or more down the line? If not, plan ahead by going with flooring that can be sanded down: solid hardwood or an engineered variety with a thicker wear layer.

If, on the other hand, you plan to keep the hand-scraped flooring, think about how you will refinish it years down the line. Ideally, to keep up the distressed look without diminishing it through sanding, you will need a floor abrader to remove only the finish, or be prepared to have a professional refinish your floors.

Source:http://www.articlesbase.com/home-improvement-articles/hand-scraped-flooring-points-to-keep-in-mind-5435851.html

Web Data Scraping Services Have Various Method Of Business

Magnetic or optical data removal or Data Scraping Services is a term that refers to the elimination of digital storage media. Data Scraping Services of the method varies, depending on medium and method used in the process.

Similarly, patents, models, business strategies and other confidential business information, including sensitive data, can be easily accessed by others if the data is not deleted.As I said in the beginning, Data Scraping Services methods vary depending on the storage medium. For each storage medium, there are a variety of Data Scraping Services techniques.

Optical media such as  that can be destroyed by the plastic granulating. This method does not extract information, but makes recovery almost impossible. However, removal of thin film that coats the top of the disk, scraping, sanding by hand or destroy physical data. In contrast, using the microwave, a less traditional technologies, stable and disk storage layer of the thin film is very effective for the most common cause sparks to load.

Typical modern magnetic media and hard drives, tape backup units of such media is possible, but in the face of such devices requires considerable financial investment in the plant. Acids, in particular, nitric acid, 50% concentration in the iron oxide layer to react with violence, it will be completely destroyed within a few minute. In some cases it may be a storage alternative for incineration. However, this may inadvertently expose caseinogens operator and may be restricted in certain countries.

Data Scraping Services, on the other hand, is defined by Wikipedia as "an automatic search for large stores of data for patterns of practice." In other words, you already know, and you learn things about it useful analysis.

Data Scraping Services is often accompanied by a lot of complex algorithms based on statistical methods. How do you see the data in the first place - is not. Data Scraping Services analysis, you only care about what is already there in many cases, a single-pass binary wipe (to write random zeroes and ones riding) will permanently deletes all data from the storage device to remove.

use of materials recovery.
It is for this reason that the technology has been left until last.
Data Scraping Services, screen scraping is not.
This is a great simplification, so I will work a bit.

Fast-forwarding to the web world today, screen scraping is the information relates to websites. This means that computer programs "crawl" or can "spider" through web sites, data retrieval. people, We deserved pages, text data Scraping Services, automated data collection, data extraction and web site even bloody website if we have a problem it presents some.

Data Scraping Services, on the other hand, is defined by Wikipedia as "an automatic search for large stores of data for patterns of practice." In other words, you already know, and you learn things about it useful analysis. Data Scraping Services is often accompanied by a lot of complex algorithms based on statistical methods. How do you see the data in the first place - is not. Data Scraping Services analysis, you only care about what is already there.

Source:http://www.articlesbase.com/outsourcing-articles/web-data-scraping-services-have-various-method-of-business-5594515.html

Scraping By

In his classic 1976 Chesapeake portrait, Beautiful Swimmers, William Warner described the scrape boat as "a workboat unlike any other I had ever seen on the Bay." Seeming half as wide as it was long, he said, it looked like a "a miniature battleship." There's a reason for that, of course. It's a classic case of form following function; the boat evolved for one purpose, to ply the Bay's grassy shallows for shedding blue crabs.

Said to "float on a heavy dew," scrape boats run from 26 to 30 feet long and 9 to 10 feet wide. The hull is a shallow-V deadrise that quickly flattens toward the stern, enabling the boat to pull its twin scrapes—rectangular steel frames, each with a trailing mesh bag—in knee-deep waters. The broad beam might sound ungainly, but the hull tapers toward the stern—betraying its sailboat origins. And it has a graceful sheer, flowing from a bow height of a few feet to little more than a foot above the water amidships.

And you want a low freeboard when you spend the whole day hoisting aboard scrapes, which weigh 50 pounds apiece, not including the load of sea grass and crabs that come in too. Low sides or not, there's a higher than average inci-dence of back problems among scrape boat crabbers. They spend long days bending in precisely the position back doctors say puts undue pressure on the lower back as they sort through rolls of grasses to pluck out the peelers and softies. And that alone may be why crab potting is now the far more common way of catching soft crabs.

Some people think that's good, assuming that dragging a scrape across the Bay's beleaguered grass flats must be destructive. But the smooth bar of the scrape, unlike a toothed dredge, doesn't uproot grasses. In fact, where scraping is traditional, the grass beds seem relatively resilient. I've often thought if Maryland and Virginia had stuck with scraping as the major legal way to soft-crab, overfishing might not have become a problem. Pots can be deployed everywhere and by the thousands, whereas scraping is limited to grass beds and to ground covered at three miles per hour; and even the sturdiest waterman can only pull two of them by hand. But peeler pots seem here to stay, and other soft crabbers have taken to using a single, large scrape operated from larger workboats by hydraulic power.

The bottom line is that these lovely, superbly functional expressions of Chesapeake crabbing culture now number only in the dozens, if you count working, wooden models. There are some fiberglass scrape boat hulls in service, and a Carolina skiff or two has been adapted for the task. They are functional, but have little art to them.

It is probably a sign of how fast scrape boats are going that the Smithsonian Institution recently took the lines off Darlene, a scraper worked by Morris Marsh of Smith Island, for its archives. You can see photos of scrape boats, and learn more about the 140-year old history of scraping, from Paula Johnson's fine book, The Workboats of Smith Island. Mr. Marsh, still going strong in his late 60s, is the scraper who took Warner out nearly 40 years ago when he was researching Beautiful Swimmers.

Indeed, scraping seems to win over those who master it. Marsh's father-in-law, Ed Harrison, scraped for almost 70 years, nearly wearing through the cross-planked bottom of his boat—from the inside—with decades of walking the planks, tending his scrapes. And an islander who scrapes with Marsh today, David Laird, says he is 71—one year younger than Scotty Boy, the scrape boat he took over from his dad in 1958. "I wouldn't even know how to crab in another boat," Laird says.

Soft crabs may well be caught—or farmed—a century from now on the Chesapeake; but no one will devise a way to take them so intimately and beautifully from the shallowest marsh edges and tiniest crevices in the shore as the scrapers do.

Source:http://www.articlesbase.com/culture-articles/scraping-by-1560919.html

Scrape Web data using R

Plenty of people have been scraping data from the web using R for a while now, but I just completed my first project and I wanted to share the code with you.  It was a little hard to work through some of the “issues”, but I had some great help from @DataJunkie on twitter.

As an aside, if you are learning R and coming from another package like SPSS or SAS, I highly advise that you follow the hashtag #rstats on Twitter to be amazed by the kinds of data analysis that are going on right now.

One note.  When I read in my table, it contained a wierd set of characters.  I suspect that it is some sort of encoding, but luckily, I was able to get around it by recoding the data from a character factor to a number by using the stringr package and some basic regex expressions.

Bring on fantasy football!

################################################################

## Help from the followingn sources:

## @DataJunkie on twitter

## http://www.regular-expressions.info/reference.html

## http://stackoverflow.com/questions/1395528/scraping-html-tables-into-r-data-frames-using-the-xml-package

## http://stackoverflow.com/questions/1395528/scraping-html-tables-into-r-data-frames-using-the-xml-package

## http://stackoverflow.com/questions/2443127/how-can-i-use-r-rcurl-xml-packages-to-scrape-this-webpage

################################################################

library(XML)

library(stringr)

# build the URL

url <- paste("http://sports.yahoo.com/nfl/stats/byposition?pos=QB",

        "&conference=NFL&year=season_2009",
        "&timeframe=Week1", sep="")

# read the tables and select the one that has the most rows

tables <- readHTMLTable(url)

n.rows <- unlist(lapply(tables, function(t) dim(t)[1]))

tables[[which.max(n.rows)]]

# select the table we need - read as a dataframe

my.table <- tables[[7]]

# delete extra columns and keep data rows

View(head(my.table, n=20))

my.table <- my.table[3:nrow(my.table), c(1:3, 5:12, 14:18, 20:21, 23:24) ]

# rename every column

c.names <- c("Name", "Team", "G", "QBRat", "P_Comp", "P_Att", "P_Yds", "P_YpA", "P_Lng", "P_Int", "P_TD", "R_Att",

        "R_Yds", "R_YpA", "R_Lng", "R_TD", "S_Sack", "S_SackYa", "F_Fum", "F_FumL")

names(my.table) <- c.names

# data get read in with wierd symbols - need to remove - initially stored as character factors

# for the loops, I am manually telling the code which regex to use - assumes constant behavior

# depending on where the wierd characters are -- is this an encoding?

front <- c(1)

back <- c(4:ncol(my.table))

for(f in front) {

    test.front <- as.character(my.table[, f])

    tt.front <- str_sub(test.front, start=3)

    my.table[,f] <- tt.front

}

for(b in back) {

    test <- as.character(my.table[ ,b])

    tt.back <- as.numeric(str_match(test, "\-*\d{1,3}[\.]*[0-9]*"))

    my.table[, b] <- tt.back
}

str(my.table)

View(my.table)

# clear memory and quit R

rm(list=ls())

q()

n

Source: http://www.r-bloggers.com/scrape-web-data-using-r/

Basic Information About Tooth Extraction Cost

In order to maintain the good health of teeth, one must be devoted and must take proper care of one's teeth. Dentists play a huge role in this regard and their support is important in making people aware of their oral conditions, so that they receive the necessary health services concerning the problems of the mouth.

The flat fee of teeth-extraction varies from place to place. Nonetheless, there are still some average figures that people can refer to. Simple extraction of teeth might cause around 75 pounds, but if people need to remove the wisdom teeth, the extraction cost would be higher owing to the complexity of extraction involved.

There are many ways people can adopt in order to reduce the cost of extraction of tooth. For instance, they can purchase the insurance plans covering medical issues beforehand. When conditions arise that might require extraction, these insurance claims can take care of the costs involved.

Some of the dental clinics in the country are under the network of Medicare system. Therefore, it is possible for patients to make claims for these plans to reduce the amount of money expended in this field. People are not allowed to make insurance claims while they undergo cosmetic dental care like diamond implants, but extraction of teeth is always regarded as a necessity for patients; so most of the claims that are made in this front are settled easily.

It is still possible for them to pay less at the moment of the treatment, even if they have not opted for dental insurance policies. Some of the clinics offer plans which would allow patients to pay the tooth extraction cost in the form of installments. This is one of the better ways that people can consider if they are unable to pay the entire cost of tooth extraction immediately.

In fact, the cost of extracting one tooth is not very high and it is affordable to most people. Of course, if there are many other oral problems that you encounter, the extraction cost would be higher. Dentists would also consider the other problems you have and charge you additional fees accordingly. Not brushing the teeth regularly might aid in the development of plaque and this can make the cost of tooth extraction higher.

Maintaining a good oral health is important and it reflects the overall health of an individual.

To conclude, you need to know the information about cost of extraction so you can get the right service and must also follow certain easy practices to reduce the tooth extraction cost.

Source:http://ezinearticles.com/?Basic-Information-About-Tooth-Extraction-Cost&id=6623204

Data Mining - Techniques and Process of Data Mining

Data mining as the name suggest is extracting informative data from a huge source of information. It is like segregating a drop from the ocean. Here a drop is the most important information essential for your business, and the ocean is the huge database built up by you.

Recognized in Business

Businesses have become too creative, by coming up with new patterns and trends and of behavior through data mining techniques or automated statistical analysis. Once the desired information is found from the huge database it could be used for various applications. If you want to get involved into other functions of your business you should take help of professional data mining services available in the industry

Data Collection

Data collection is the first step required towards a constructive data-mining program. Almost all businesses require collecting data. It is the process of finding important data essential for your business, filtering and preparing it for a data mining outsourcing process. For those who are already have experience to track customer data in a database management system, have probably achieved their destination.

Algorithm selection

You may select one or more data mining algorithms to resolve your problem. You already have database. You may experiment using several techniques. Your selection of algorithm depends upon the problem that you are want to resolve, the data collected, as well as the tools you possess.

Regression Technique

The most well-know and the oldest statistical technique utilized for data mining is regression. Using a numerical dataset, it then further develops a mathematical formula applicable to the data. Here taking your new data use it into existing mathematical formula developed by you and you will get a prediction of future behavior. Now knowing the use is not enough. You will have to learn about its limitations associated with it. This technique works best with continuous quantitative data as age, speed or weight. While working on categorical data as gender, name or color, where order is not significant it better to use another suitable technique.

Classification Technique

There is another technique, called classification analysis technique which is suitable for both, categorical data as well as a mix of categorical and numeric data. Compared to regression technique, classification technique can process a broader range of data, and therefore is popular. Here one can easily interpret output. Here you will get a decision tree requiring a series of binary decisions.

Our best wishes are with you for your endeavors.

Source: http://ezinearticles.com/?Data-Mining---Techniques-and-Process-of-Data-Mining&id=5302867

Do blog scraping sites violate the blog owner's copyright?

I noticed that my blog has been posted on one of these website scraping sites. This is the kind of site that has no original content, but just repeats or scrapes content others have written and does it to get some small amount of ad income from ads on the scraping site. In essence the scraping site is taking advantage of the content of the originating site in order to make a few dollars from people who go to the site looking for something else. Some of these websites prey on misspelling. If you accidentally misspell the name of an original site, you just may end up with one of these patently commercial scraping sites.

Google defines scraping as follows:

•    Sites that copy and republish content from other sites without adding any original content or value
•    Sites that copy content from other sites, modify it slightly (for example, by substituting synonyms or using automated techniques), and republish it
•    Sites that reproduce content feeds from other sites without providing some type of unique organization or benefit to the user

My question, as set out in the title to this post, is whether or not scraping is a violation of copyright. It turns out that the answer is likely very complicated.  You have to look at the definition of a scraping site very carefully. Let me give you some hypotheticals to show what I mean.

Let's suppose that I write a blog and put a link in my blog post to your blog. Does that link violate your copyright? I can't imagine that anyone would think that there was problem with linking to another website on the Web. In this case, there is no content from the originating site, just a link.

But let's carry the hypothetical a little further. What if I put a link to your site and quote some of your content? Does this violate copyright law? If you are acquainted with any of the terminology of copyright law; think fair use. The issue here is whether or not the "quoted" material is a substantial reproduction of the entire original content? I would have the opinion that duplicating an entire blog post either with or without attribution would be a violation of the originator's copyright.

So is the scraping website protected by the "fair use" doctrine? Does the fact that the motivation for listing the original websites is to make money have anything to do with how you would decide if there was or was not a violation of the originator's copyright? By the way, the copyright does not make a distinction between a commercial and non-commercial use of the original constituting or not constituting a violation of copyright. The fact that the reproducing (scraping) party does not make money from the reproduction is not a factor in the issue of violation, although it may ultimately be an issue as to the amount of damages assessed.

Does the fact that the actions of the scraper annoy me, make any difference? I would answer, not in the least. Whether or not you are annoyed by the violation of the copyright makes no difference as to whether or not there is a violation. Likewise, you have no independent claims for your wounded feelings because of the copied content. Copyright is a statutory action (i.e. based on statutory law) and unless the cause of action is recognized by the law, there is no cause of action. Now, in an outrageous case, you may have  some kind of tort (personal injury) claim, but that is way outside of my hypothetical situation.

So what is the answer? Does scraping violate the originator's copyright? If only a small portion of the blog is copied (scraped) then I would have to have the opinion that it is not. Essentially, no matter what the motivation of the scrapper, there is not enough content copied to violate the fair use doctrine. Now, that is my opinion. Your's might differ. That is what makes lawsuits.

Do I think there are other reasons why scraping websites are objectionable? Certainly, but those reasons have nothing to do with copyright and they are probably the subject of another different blog post. So, if you are reading this from scraping website, bear in mind that there may be a serious problem with that type of website.

Source:http://genealogysstar.blogspot.in/2013/05/do-blog-scraping-sites-violate-blog.html

Local ScraperWiki Library

It quite annoyed me that you can only use the scraperwiki library on a ScraperWiki instance; most of it could work fine elsewhere. So I’ve pulled it out (well, for Python at least) so you can use it offline.

How to use
pip install scraperwiki_local
A dump truck dumping its payload

You can then import scraperwiki in scripts run on your local computer. The scraperwiki.sqlite component is powered by DumpTruck, which you can optionally install independently of scraperwiki_local.

pip install dumptruck

Differences

DumpTruck works a bit differently from (and better than) the hosted ScraperWiki library, but the change shouldn’t break much existing code. To give you an idea of the ways they differ, here are two examples:

Complex cell values
What happens if you do this?
import scraperwiki
shopping_list = ['carrots', 'orange juice', 'chainsaw']
scraperwiki.sqlite.save([], {'shopping_list': shopping_list})
On a ScraperWiki server, shopping_list is converted to its unicode representation, which looks like this:
[u'carrots', u'orange juice', u'chainsaw']
In the local version, it is encoded to JSON, so it looks like this:
["carrots","orange juice","chainsaw"]

And if it can’t be encoded to JSON, you get an error. And when you retrieve it, it comes back as a list rather than as a string.

Case-insensitive column names

SQL is less sensitive to case than Python. The following code works fine in both versions of the library.

In [1]: shopping_list = ['carrots', 'orange juice', 'chainsaw']
In [2]: scraperwiki.sqlite.save([], {'shopping_list': shopping_list})
In [3]: scraperwiki.sqlite.save([], {'sHOpPiNg_liST': shopping_list})
In [4]: scraperwiki.sqlite.select('* from swdata')

Out[4]: [{u'shopping_list': [u'carrots', u'orange juice', u'chainsaw']}, {u'shopping_list': [u'carrots', u'orange juice', u'chainsaw']}]

Note that the key in the returned data is ‘shopping_list’ and not ‘sHOpPiNg_liST’; the database uses the first one that was sent. Now let’s retrieve the individual cell values.

In [5]: data = scraperwiki.sqlite.select('* from swdata')
In [6]: print([row['shopping_list'] for row in data])
Out[6]: [[u'carrots', u'orange juice', u'chainsaw'], [u'carrots', u'orange juice', u'chainsaw']]

The code above works in both versions of the library, but the code below only works in the local version; it raises a KeyError on the hosted version.

In [7]: print(data[0]['Shopping_List'])
Out[7]: [u'carrots', u'orange juice', u'chainsaw']

Here’s why. In the hosted version, scraperwiki.sqlite.select returns a list of ordinary dictionaries. In the local version, scraperwiki.sqlite.select returns a list of special dictionaries that have case-insensitive keys.

Develop locally

Here’s a start at developing ScraperWiki scripts locally, with whatever coding environment you are used to. For a lot of things, the local library will do the same thing as the hosted. For another lot of things, there will be differences and the differences won’t matter.

If you want to develop locally (just Python for now), you can use the local library and then move your script to a ScraperWiki script when you’ve finished developing it (perhaps using Thom Neale’s ScraperWiki scraper). Or you could just run it somewhere else, like your own computer or web server. Enjoy!

Source:https://blog.scraperwiki.com/2012/06/local-scraperwiki-library/

A quick guide on web scraping: Why and how

Web scraping, which is the collection and cleaning of online data, is the first step in any
data-driven project. Here’s a short video that explains what scraping is, and how to create
automated scraping jobs using a digital tool.

This is a 15-minute video created by an instructor at Ohio State University. In the first six
minutes, the instructor talks about why we need web scraping; he then shows how to use a
scraping tool, OutWit Hub, to collect data scattered in a large database.

FYI: read reviews by Reporters’ Lab of OutWit Hub and other web scraping tools.

Source: http://www.mulinblog.com/quick-guide-web-scraping/

Scraping and Analyzing Angel List Syndicates: Kimono Labs + Silk

Because we use Silk to tell stories and visualize data, we are always looking for interesting ways to pull data into a Silk. Right now that means getting data into the CSV format. Fortunately, a wave of new and powerful visual webscraping tools and services have emerged. These make it very simple for anyone (no technical skills required) to scrape data from a website and export that data into a CSV which we can quickly upload into a Silk.

Cool New Scraping Tools

One of the tools we love in this new space is Kimono Labs. Backed by Y Combinator, Kimono combines a visual scraping editor with the ability to do very granular code-inspector level editing to scraping paths. Saved scrapes can be turned into APIs and exported as JSON. Kimono also lets you save time-series versioning of scrapes.

Data from angel-list-syndicates.silk.co

Like many startups, we watch the goings on at AngelList very closely. Syndicates are of particular interest. Basically, these are DIY venture capital pools that allow a qualified investor to serve as a syndicate leader and aggregate small investments from other qualified investors who are members of AngelList. The idea of the syndicates is to democratize the VC process and make it easier and less risky for individuals to participate.

We used Kimono to scrape information on the Top 25 Syndicates ranked by dollars backing each round. Kimono makes it very easy to visually designate which parts of a page to scrape and how many rows there are on a page. (Here you can see me highlighting the minimum dollar investment). We downloaded the information as a CSV and did a quick scrub to get it ready for upload to Silk. The process took no more than 15 minutes.

We could tell by eyeballing the numbers beforehand that a serious Power Law was in effect. And the actual data analysis on Silk bore this out. We chose to use a pie chart to show distribution. Three syndicates control nearly two-thirds of all the committed capital by Angel.co members in the syndicate program. One of the top three - Tim Ferriss - has no background as a venture capitalist or building technology companies but is rapidly becoming a force in startup investing. The person with the largest committed syndicate pool, Gil Penachina, is someone who is a quiet mover and shaker in Silicon Valley but he clearly packs a huge punch.

The largest syndicate in terms of likely commitments of deals per year is Foundry Group Angels, a group led by Brad Feld (@bfeld). While they put in less per deal, they are planning to back over 50 deals per year - a huge number. Trailing far behind those three was media impresario and Launch conference mogul Jason Calacanis, who is one of the most visible people in the startup space.

Source: http://blog.silk.co/post/83501793279/scraping-and-analyzing-angel-list-syndicates